Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Light Switch

Model: Audi A4 B6 - Years 2000-2004
Part: Headlight

There are different versions of the vehicle's light switch, and they fundamentally differ based on the trim level: it depends on whether the vehicle has fog lights, etc.
In particular, the most common versions are three, and each requires a specific sequence of movements to be removed from its housing: you need to rotate the knob, press it to release the locking clips, and then pull it outward. Execute the sequence carefully to avoid irreparably damaging the button while trying to simulate the movements in the correct order.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the light switch of an Audi A4
How to remove the light switch of an Audi A4
Audi A4 (2004-2008 / B7) Before starting, we will have to sit in the driver's seat of our Audi A4. So let's start by going to press and hold the light switch. In the meantime…
Replacement of the brake pedal switch on the Audi A4.
Replacement of the brake pedal switch on the Audi A4.
Audi A4 (2004-2008 / B7) Below we will see the instructions that will allow us to disassemble and replace the rear brake pedal switch of the Audi A4. First, we get in the car…
Replacement of light switch on Audi A4 B7
Replacement of light switch on Audi A4 B7
Audi A4 (2004-2008 / B7) To remove the headlight switch on Audi A4 (versions B6 and B7) you have to push the same switch all the way and then rotate it: as you can see in the…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos