Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Cabin air filter

The cabin air filter is located externally to the cabin itself, specifically just below the windscreen on the passenger side. Disconnect the plastic cover under the windscreen on the passenger side by removing the relevant clips and sliding off the seal: at the corner, just behind the strut tower, you will find the cabin air filter; remove any dirt residue, extract the old filter ensuring no debris falls inside, and install the new one, respecting the direction of the airflow.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Audi A3?
How to Replace the Front Headlight Bulb on the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To replace the front headlight bulb on the Audi A3, lift the car using a jack or ramp and unscrew the screws securing the side of the front bumper an…
How to Reset the Key Battery Warning Light on Audi A3?
How to Reset the Key Battery Warning Light on Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) When the key battery warning light appears on the Audi A3 instrument panel, it means the battery needs to be replaced: replacing it will make the war…
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
Audi A3 (2012-2019 / 8V, MK 3) Below are the instructions on how and when to replace the timing belt on the Audi A3 2.0 TDI (and other models with the same engine); the manufacture…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos