Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 3, 8V
- Years 2012-2019 In this video tutorial we can see how it is possible to change the rear bumper on an Audi A3 by following a few simple steps. The necessary material: a screwdriver, Torx T20 and T40 keys, a 10 tubular. To facilitate the disassembly of the bumper, it is possible to position ramps under the rear wheels, to lift the car. We have to unscrew 5 screws of the diffuser which cover two screws which attach the bumper below; we have three torx screws in the wheel arch and also on the other side; inside the trunk we have to remove the plastic behind, where two 10mm bolts are hidden. We have to remove the fixings and handles, where behind there is a Torx T20 screw and also on the other side. Move the two bulkheads and we'll have two more 10 bolts on the sides. At this point the bumper will come off.
Posted on 22 December 2022 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |