Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the armrest in the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

In this tutorial we can see how to replace the front armrest in the Audi A4 B8, an extremely simple and fast operation. First of all, go inside the passenger compartment, then lift the armrest completely, grab the internal plastic panel by the central edge and, pulling it strongly towards us, disengage it from the armrest itself. Once this is done, unscrew the two screws just released using a Torx T25 key, pull the armrest upwards and separate it from the base. To fit the spare part, simply follow the reverse procedure exactly.

Posted on 22 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the armrest on the Audi A4 B8
How to remove the armrest on the Audi A4 B8
Audi A4 (2007-2016 / B8) In this video tutorial we will see how to remove and replace the center tunnel armrest on the Audi A4 B8, but also on the A5, A6 and Q3 and Q5. First…
How do you replace the armrest of the Audi A4?
How do you replace the armrest of the Audi A4?
Audi A4 (2000-2004 / B6) In order to replace the center armrest of the Audi A4, you need to remove the protective panel located at the back, just in front of the rear seat: o…
How to install the armrest under the armrest of the Audi A4 B8
How to install the armrest under the armrest of the Audi A4 B8
Audi A4 (2007-2016 / B8) In this video we can see how to install a LED light under the armrest of the Audi A4 B8 version: lift the armrest, and with a drill and a small drill…

    Frequently Asked Questions

    • A4 2007-2016 - Where is the Audi A4 fuel pump relay located? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos