Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Exterior Rearview Mirror

Model: Audi Tt MK 1, 8N - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Side mirror

See other generations:
Video tutorial

The exterior rearview mirror is attached to the door via a support bracket bolted to the door itself. Start by disconnecting the mirror from the adjustment system support by prying it off from the back, being careful not to damage the plastic tabs, and disconnect the defrosting wires.

Remove the safety clip that secures the mirror to the door support, spray some penetrating oil, and remove the aluminum tab. Disconnect the wiring harness for the adjustment system to take off the mirror. At this point, unscrew the bolts that secure the support to the door.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Remove the Exterior Rearview Mirror of the Audi TT 2
How to Remove the Exterior Rearview Mirror of the Audi TT 2
Audi Tt (2006-2014 / 8J, MK 2) .. Removing the exterior rearview mirror from your Audi TT second generation is very simple. To complete.. …
How to Remove the Side Mirror on Audi TT
How to Remove the Side Mirror on Audi TT
Audi Tt (2006-2014 / 8J, MK 2) How do you remove the mirror from an Audi TT? Let's see how to take off the side mirror. Pry between the perimeter of the mirror frame and the mirror…
How to Remove the Outside Rearview Mirror on an Audi TT?
How to Remove the Outside Rearview Mirror on an Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) Removing the outside rearview mirror on an Audi TT, as shown in this tutorial, is an extremely simple and quick task. First, grasp the glass from the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos