|
Do it yourself
| |||
| ||||
How to reset the service light on Audi A4.
Model: Audi A4
B7
- Years 2004-2008
To reset the service indicator on an Audi A4 B7, you can follow these steps: Turn on the car without starting the engine. Make sure the mileage indicator or the central display shows the total mileage instead of the consumption indicator. Press and hold the "RESET" button or the "0.0" button (depending on the model) on the dashboard or multifunction steering wheel. While holding the button, turn on the ignition (without starting the engine). Continue to hold the button for a few seconds until a message appears on the display or until the service indicator starts flashing. Release the button. Use the "RESET" button or the navigation button (if available) to scroll through the menu options until you find the "Service" or "Oil" option. Select the service reset option by pressing the "RESET" button or the navigation button. Confirm the operation when prompted by pressing the "RESET" button or the navigation button again. The service indicator will be reset and should turn off. Turn off the ignition and wait a few seconds. Turn on the ignition again to verify that the service indicator remains off.
Posted on 27 June 2023 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2004-2008 /
B7)
Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
Audi A4
(2014-2024 /
B9)
The Service indicator that is shown on the instrument panel of the Audi A4 can be reset by turning on the instrument panel and navigating through the…
Audi A4
(2004-2008 /
B7)
This article will illustrate the procedure for resetting the service light on a 2008 Audi A4 as the ECU does not detect the service and the light rem…
Other guides you may be interested in
|
How to Replace the Front Headlamp Bulbs on a Dacia Sandero
Open the bonnet by pulling the lever located at the bottom left of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlamp (at the rear of the headlamp) and remove it. After removing the caps, you will find the bulbs with metal clips; pull out the bulb holder from the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holder back into the headlamp housing. Reassemble all previously removed parts. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.069
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |