Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Exterior Rearview Mirror of the Audi Q7

Model: Audi Q7 MK 1, 4L - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side mirror

See other generations:
Video tutorial

This guide explains how to remove and replace the exterior rearview mirror of the Audi Q7 by following these simple steps. First, open the front door and start removing the front door panel by unscrewing all the screws and disconnecting the electrical connector of the switch panel; once removed, disconnect the electrical connector of the mirror as shown in the video.

Now unscrew the mounting screws of the mirror to remove it, pulling it out from the outside; install the new mirror and the door panel!


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Rearview Mirror of the Audi Q7
How to Remove the Interior Rearview Mirror of the Audi Q7
Audi Q7 (2006-2015 / MK 1, 4L) Today, you will see the main instructions for removing and replacing the interior rearview mirror of the Audi Q7. First, get in the vehicle and start…
Removing the Mirror on Audi Q7
Removing the Mirror on Audi Q7
Audi Q7 (2015-2026 / 4M, MK 2) Want to remove the exterior mirror on the Q7? Let's see how to do it. Leverage between the perimeter of the mirror frame and the mirror glass. Apply …
How to Remove the Outside Rearview Mirror on Audi Q7
How to Remove the Outside Rearview Mirror on Audi Q7
Audi Q7 (2006-2015 / MK 1, 4L) Remove the outside rearview mirror on Audi Q7. Use a plastic or rubber trim tool to pry between the perimeter of the mirror frame and the mirror glas…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos