Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Seatbelt Chime on the Audi Q3

Model: Audi Q3 F3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will learn how to disable the chime that alerts you when the seatbelt is not fastened on the Audi Q3. This is just to eliminate the annoying sound of the chime, as the seatbelt MUST always be worn. Here’s how to do it using an OBD11 connected to the OBD port located under the dashboard on the driver’s side and an application downloaded on a tablet: first, perform a scan of the control units.

Then, there are several methods: the simplest is to go to "applications", type "seat" in the upper right corner, and it will show exactly what we need: switch it to "off", confirm, and you’re done. You can also do it from control unit 17/coding/seatbelt alarm/variant 1 and change it to "off" and confirm.

Alternatively, you can do it from "adaptation", where you type "seatbelts" and it will show what you are looking for, click "yes" and confirm.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure sensor of the Audi Q3
How to reset the tire pressure sensor of the Audi Q3
Audi Q3 (2018-2025 / F3) In this article we will see how to reset the tire pressure warning light on the Audi Q3. To reset this warning light, first start the instrument pane…
How to reset the tire pressure sensor on an Audi Q3 f3
How to reset the tire pressure sensor on an Audi Q3 f3
Audi Q3 (2018-2025 / F3) We can see in this video how to reset the tire pressure warning light of the Audi Q3: first, we need to go to the multimedia button panel, located in…
How do you replace the timing belt of the Audi Q3?
How do you replace the timing belt of the Audi Q3?
Audi Q3 (2018-2025 / F3) It will be possible to replace the timing belt of the Audi Q3 by lifting the car so that the front right wheel does not touch the ground. Once it has…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos