Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Audi A4 B8 2009

Model: Audi A4 B8 - Years 2007-2016
Part: Air filter

If the engine air filter in your Audi A4 B8 (2009) is now excessively dirty or worn out, then it is time to replace it with a new filter. Below we will explain the steps you need to follow in order to complete the operation without difficulty. First of all, lift the front hood and locate the box containing the air filter, located in the lower left corner of the engine compartment. Then remove the protective cover and open the box in question in order to access the air filter. Finally, replace the air filter.

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Audi A4.
How to replace the air filter of the Audi A4.
Audi A4 (2007-2016 / B8) Replacing the cabin air filter of the Audi A3 is a very simple operation that can be done independently by following the instructions in our video tu…
How to replace the cabin air filter of the Audi A4
How to replace the cabin air filter of the Audi A4
Audi A4 (2007-2016 / B8) If you are planning to replace the cabin air filter in your Audi A4, then all you have to do is read the following steps and then put them into pract…
Removing the Audi Avant B6 air filter
Audi A4 (2000-2004 / B6) We see the disassembly of the air filter from inside the engine compartment of the Audi A4 car. We open and lift the front hood, locate the air filte…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos