Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing LED Bulbs in Angel Eyes Headlights

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

To replace the LED bulbs in the ANGEL EYES headlights, you must completely remove the wheel to access the front lighting assembly. Unscrew the screws securing the cover, those under the fender, and those under the bumper that hold the grille. Remove the fender grille, and you finally have access to the headlight. Remove the protective cap with a flat screwdriver, and using a 15 Torx wrench, unscrew the bulb holder, which gently pulls out from its seat after disconnecting the electrical connector. Place the assembly on a support and extract the bulb by removing the clips. Install the new bulb. Reinstall the bulb holder in its respective seat and reposition the headlight assembly in its housing, connecting the corresponding connector. Screw in the securing screws and reassemble everything.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install angel eyes bulbs on the BMW 3 Series?
How to install angel eyes bulbs on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In order to install the angel eyes bulbs on the BMW 3 Series you have to open the hood and unscrew the bolt located on the top of the headlight conta…
How to Replace the Angel Eyes Bulb on BMW E90
How to Replace the Angel Eyes Bulb on BMW E90
BMW Serie 3 (2005-2013 / E91, E90, E92) The position light bulb for this car model, characterized by the so-called angel eyes appearance, is a special 12 Volt 6 watt bulb, with a unique sha…
Installing LED Angel Eyes Bulb in Front Headlights
Installing LED Angel Eyes Bulb in Front Headlights
BMW Serie 3 (1998-2006 / E46) To install the ANGEL EYES bulb kit in the headlights, you must completely remove the front light assembly. Obtain the kit and start with the plastic …

Other guides you may be interested in

How to Replace the Rear Headlight Bulbs on a Peugeot 308

Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver, unscrew (with a socket wrench or screwdriver with a bit) the securing nuts located at the side of the rear headlight. Once the headlight is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, refit the headlight and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos