Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the external rearview mirror of the BMW IX3

Model: BMW BMW Various
Part: Side mirror

Let's discover the process and instructions on how to disassemble and replace the external rearview mirror of the BMW IX3, following the instructions below. First of all, we open the front door of the car and start removing the triangular plastic cover of the mirror; then we use a socket wrench with an extension to unscrew the mirror screws, as shown in the video. At this point, we disconnect the electrical connector of the adjustment to remove it from the outside, replacing it with the new one; finally, we adjust the mirror and the glass!

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the LED strip of the external rearview mirror of the BMW
How to replace the LED strip of the external rearview mirror of the BMW
BMW BMW Various The following video tutorial will show you the steps to replace the LED strip on the external rearview mirror of a BMW. This operation is the same fo…
How to match the BMW rearview mirror with the integrated garage door opener.
How to match the BMW rearview mirror with the integrated garage door opener.
BMW BMW Various In this video we see how to pair the BMW mirror with the integrated garage door opener. This is a very useful accessory that matches this frameless m…
Remove the Internal Rear View Mirror on BMW
Remove the Internal Rear View Mirror on BMW
BMW BMW Various Removing the internal rear view mirror can be useful if you need to clean the windscreen or if it may have been damaged or worn from an impact or sim…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos