Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to match the BMW rearview mirror with the integrated garage door opener.

Model: BMW BMW Various
Part: Checks and maintenance

In this video we see how to pair the BMW mirror with the integrated garage door opener. This is a very useful accessory that matches this frameless mirror, which is also very aesthetically pleasing. With the car stationary, we will have to press the two external buttons on the interior mirror for about 10 seconds, until the green LED at the bottom of the mirror flashes rapidly. Press the button you want to program once and the orange LED will start flashing slowly. Press and hold the button you want to program on the remote; if the LED light turns green then the programming was successful; if it continues to flash orange then it failed and needs to be repeated.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the external rearview mirror of the BMW IX3
Replacement of the external rearview mirror of the BMW IX3
BMW BMW Various Let's discover the process and instructions on how to disassemble and replace the external rearview mirror of the BMW IX3, following the instructions…
How to replace the LED strip of the external rearview mirror of the BMW
How to replace the LED strip of the external rearview mirror of the BMW
BMW BMW Various The following video tutorial will show you the steps to replace the LED strip on the external rearview mirror of a BMW. This operation is the same fo…
Remove the Internal Rear View Mirror on BMW
Remove the Internal Rear View Mirror on BMW
BMW BMW Various Removing the internal rear view mirror can be useful if you need to clean the windscreen or if it may have been damaged or worn from an impact or sim…

    Frequently Asked Questions

    • Bmw Vari - What does the term BMW X Line mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos