Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Speakers

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Speaker

See other generations:
Video tutorial

To replace the rear side speakers, start by removing the side panel. After removing the screws from the armrest, pry the panel to free it from the plastic retaining clips.

Now, begin removing the screws securing the trim to proceed with removing the lower panel. Also, take out the rear seat and the backrests, then continue by removing all other side panels.

Remove the woofer speaker and replace it with the new one; do the same to remove the tweeter speaker from its mount and replace it with the new one.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing the Speakers in the BMW 3 Series
Replacing the Speakers in the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace all the speakers in the BMW 3 Series, following the instructions below. First, get inside the vehi…
How to Replace the Rear Speakers in a BMW 3 Series?
How to Replace the Rear Speakers in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the rear speakers in a BMW 3 Series, located near the rear shelf, you need to fully raise the headrests of the rear seats. Once the headre…
Replacing Door Speakers in BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Are the speakers in your BMW 3 Series damaged? Let's see how to remove them. You need to take off the door panel to access the speaker. Use a trim to…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos