Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ignition cylinder of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

Today's main steps will show us how to disassemble and replace the ignition cylinder of the BMW 3 Series. First, we get on board the car, on the driver's side, and start removing the cover behind the steering wheel; then we disconnect the electrical wiring of the ignition cylinder to remove it later, as shown in the video. At this point, we carry out the repair or replacement of the ignition cylinder with the new one, as well as with the original one; this involves replacing the ignition key, following the video tutorial until the end!

Posted on 9 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the starter cylinder in the BMW 3 Series?
How to disassemble the starter cylinder in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial we can see how to disassemble the ignition cylinder in the BMW 3 Series, an extremely simple and quick operation. To do this, we wil…
How to Replace the Outer Handle on a BMW 3 Series?
How to Replace the Outer Handle on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To replace the outer handle on a BMW 3 Series, open the door to detach the circular cover on the side of the door. Under this cover, you will find th…
How to Replace the Trunk Lock on the BMW 3 Series?
How to Replace the Trunk Lock on the BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) To replace the trunk lock on the BMW 3 Series, lift the trunk and remove the inner cover to access the underlying parts. Once the cover is removed, l…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos