Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill AdBlue on a BMW X6

Model: BMW X6 MK 2, F16 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: AdBlue warning light

See other generations:
Video tutorial

In today's video guide, you will see the entire process needed to refill the AdBlue fluid on a BMW X6, second generation model produced from 2014 to 2019. First, go to the AdBlue menu using the multimedia display on the dashboard, where you will see the remaining range of this fluid and the quantity needed, as shown in the video.

After that, obtain the necessary amount of fluid and add it to the tank through the blue cap located inside the engine compartment on the left.

Finally, check the menu again to confirm the successful completion of the procedure.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a BMW X6
How to Replace the Key Battery of a BMW X6
BMW X6 (2007-2014 / MK 1, E71) Start by pressing the button located on the bottom section of the key fob for your BMW X6, then pull out the physical key. Next, unclip the clip that…
Where to Find the Cabin Fuse Box of the BMW X6 F16
Where to Find the Cabin Fuse Box of the BMW X6 F16
BMW X6 (2014-2019 / MK 2, F16) If you own a BMW X6 F16 and want to easily locate the fuse box, read this guide and follow the steps described. First, access the front passenger sea…
Where to Find the Fuse Box of the BMW X6
Where to Find the Fuse Box of the BMW X6
BMW X6 (2007-2014 / MK 1, E71) If you want to locate the fuse box in your first-generation BMW X6 (2007-2014), follow the steps outlined in this guide. First, access the passenger …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos