Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to remove the window motor of your BMW X3

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Window motor
Operation: How to remove the window motor of your BMW X3

How to remove the window motor of your BMW X3? Let's see together in this video how to proceed: let's disconnect the battery terminals, with a torx insert screwdriver we go to unscrew the screws located in the inside door handle, taking care not to scratch it. We remove the plastic cover with a lever, unscrew the screw placed in the slot. Once removed, we also unscrew that of the internal door opening lever. We detach the door panel, unhook the clamps of the window lifters and speakers. Now that we have removed the door panel, we detach the adhesive cover from the sheet metal, unscrew the window motor with a screwdriver. We replace the piece and reassemble everything going backwards.


Posted on 13 October 2023 by ScegliAuto



How to replace the BMW X3 window regulator
BMW X3 (2003-2010 / MK 1, E83) The replacement of the window lifting mechanism obviously requires the disassembly of the door panel and the aluminum sub-panel in order to access th
How to replace the transfer case gear on the BMW X3
BMW X3 (2003-2010 / MK 1, E83) If, especially during the starting or acceleration phase, you feel some jerks and the 4x4 warning light comes on on the instrument panel display, the
How to replace the transfer case motor on BMW X3 Series
BMW X3 (2003-2010 / MK 1, E83) Let's see how to remove and replace the transfer case motor present on the BMW X3 Series: we lift the car on a column bridge, we identify the transfe

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos