Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" indicator on a BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Service warning light

To reset the "Service" light on a BMW 1 Series, start by turning on the instrument panel without starting the engine. Press and hold the button on the bottom left of the instrument panel until a yellow triangle with an exclamation point appears. Continue holding until the reset menu appears. Use the button to scroll through the menu options until you find the service indication to reset. Once selected, hold the button until "Reset?" appears on the display. Release the button and then press again to confirm the reset. The display will show "Reset in progress" and then "Reset completed" to confirm that the "Service" light has been successfully reset. Turn off the instrument panel and turn it back on to verify that the "Service" light is no longer active.

Posted on 23 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a BMW 1 Series
How to Reset the "Service" Light on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you can start, ensure that the service has been carried out, then sit in the driver's seat of your BMW 1 Series. Begin by pressing the appropr…
How to reset the service light on the 2020 BMW
How to reset the service light on the 2020 BMW
BMW Serie 1 (2019-2026 / MK 3, F40) Resetting the service light, related to the maintenance of the 2020 BMW 1 Series, is a very simple and quick operation, which can be done independent…
How do you reset the brake wear indicator light on the BMW 1 Series?
How do you reset the brake wear indicator light on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To reset the brake wear indicator light on the BMW 1 Series, you need to turn on the instrument panel by inserting the ignition key into the correspo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos