Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2020 BMW

Model: BMW Serie 1 MK 3, F40 - Years 2019-2026
Part: Service warning light

Resetting the service light, related to the maintenance of the 2020 BMW 1 Series, is a very simple and quick operation, which can be done independently thanks to our short video tutorial that will explain the steps to follow. To reset the service light, we must turn on the car's instrument panel and then press the BC button located on the left lever of the steering wheel. Press the button until you select the option related to kilometers, and then hold it down until the message confirming the reset appears. Finally, turn off and turn on the instrument panel.

Posted on 7 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service of the BMW 1 Series F20
How to reset the service of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video we see how to reset the service light of the BMW 1 Series: when we are in the car we must make sure that all doors, the rear trunk and …
How to reset the tire pressure light in the BMW 1 Series?
How to reset the tire pressure light in the BMW 1 Series?
BMW Serie 1 (2019-2026 / MK 3, F40) Resetting the tire pressure warning light in the BMW 1 Series, as we can see in this tutorial, is an extremely simple and quick operation. Before pro…
How to reset the service indicator on the BMW 1 Series F40
How to reset the service indicator on the BMW 1 Series F40
BMW Serie 1 (2019-2026 / MK 3, F40) If you want to manually reset the service light that continues to remain on the instrument panel of your BMW 1 Series f40, just follow the steps desc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos