Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil indicator on the 2024 BMW M4 Competition

Model: BMW Serie 4 G22, G23, G26, MK 2 - Years 2020-2026
Part: Service warning light

If you want to manually reset the oil light of your new BMW M4 Competition 2024 in total autonomy and without any cost, then all you have to do is read the following guide and apply the described procedure. First, enter the interior of the car and reach the driver's seat, then turn on the dashboard in diagnostic mode by pressing the start button twice and locate the BC button on the left lever of the steering wheel. At this point, hold down the "BC" button for about 15 seconds, then release it and confirm the reset of the oil light by holding it down again until the operation is completed.

Posted on 6 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the BMW 4 Series F33
How to reset the service indicator on the BMW 4 Series F33
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) If you own a BMW Series 4 F33 and want to learn how to properly complete the manual reset of the engine oil light, all you have to do is read the fol…
How to Reset the Tire Pressure Light on a BMW 4 Series F32
How to Reset the Tire Pressure Light on a BMW 4 Series F32
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) If the tire pressure warning light continues to appear on the dashboard display of your BMW 4 Series F32 (2014 model) despite no punctures, follow th…
How to Reset the Service Light on a BMW 4 Series
How to Reset the Service Light on a BMW 4 Series
BMW Serie 4 (2020-2026 / G22, G23, G26, MK 2) On the BMW 4 Series, the oil service reset is performed from the driver's seat using the digital instrument cluster. In the video, the car is shown w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos