Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the panoramic roof of the BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Checks and maintenance

In order to replace the panoramic roof of the BMW 5 Series, it is necessary to completely remove the car's headliner, so that it is possible to access the mechanisms that allow the roof to move: to detach the headliner, all bulky parts in the interior such as handles, door pillars, ceiling lights, etc. must be removed. Once the headliner is extracted from the rear of the car, it will be possible to loosen the screws that secure the panoramic roof and disconnect the fastening screws, so that the new piece can be inserted.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located in the BMW 5 Series?
Where Are the Fuses Located in the BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) The fuses in the BMW 5 Series are divided among three fuse boxes located in different areas of the vehicle: the first is located in the engine compar…
How to Replace the Courtesy Lights on the BMW 5 Series?
How to Replace the Courtesy Lights on the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) To replace the courtesy lights on the BMW 5 Series, use a tool to pry and completely detach the interior light fixture from its housing in the center…
How do you replace the ventilation nozzles of the BMW 5 Series?
How do you replace the ventilation nozzles of the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In order to replace the ventilation grilles of the BMW 5 Series, you need to pry them off with an object like a screwdriver, so that you can complete…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos