Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a new remote control in a BMW?

Model: BMW BMW Various
Part: Key

In this tutorial, we can see how to program a new remote control in a BMW, an extremely simple and fast operation. To do this, we will obviously need a working key, otherwise it will be necessary to go to an official BMW dealership. First, unlock the locks using the working key, then go inside the car and place the new remote control near the indicated sensor. Then press and hold the brake pedal, press the start button, and keep both in position until the procedure is complete.

Posted on 22 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the BMW remote control
How to replace the battery of the BMW remote control
BMW BMW Various Today we will explain how to replace the battery of the remote control for BMW vehicles. The battery we will need to purchase is a CR 2032. We begin …
How to replace the battery of the BMW vehicle remote control
How to replace the battery of the BMW vehicle remote control
BMW BMW Various The following video tutorial refers to the replacement of the battery of the remote control for BMW vehicles belonging to the series 1, 2, 3, 4, and …
How to start a BMW with a dead remote battery
How to start a BMW with a dead remote battery
BMW BMW Various In this video we see how to start a BMW car with a low battery remote control: changing the battery is simple and we can easily find one of our tutor…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos