Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you close the convertible top of the BMW 1 Series when it is stuck?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Convertible top

In order to close the hood of the BMW 1 Series when it is locked, you need to open the rear hatch by pulling the two cords located on the sides of the trunk: once these two cords have been pulled, it will be possible to unlock the hood mechanism. You will now need to lift the panel at the back of the headrests in order to raise the hood mechanism itself: once this has been pulled forward to the windshield, you will need to secure it with the appropriate screws and finally it will be possible to close the rear panel as well.

Posted on 2 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Open the Roof with the BMW 1 Remote
Open the Roof with the BMW 1 Remote
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Want to open or close the fabric roof on your BMW 1 Series using the remote key? Here’s how to open/close the cover. Press the buttons on the key rem…
What to Do If Your Car Gets Stuck in the Snow
What to Do If Your Car Gets Stuck in the Snow
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video, we will see what to do if your car gets stuck in the snow. First, dig around the wheels with a spade or your hands to remove some snow…
How to Adjust the Handbrake on BMW 1 Series
How to Adjust the Handbrake on BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this video, adjust the handbrake on the BMW 1 Series. Pull the handbrake lever up one click. Then, using a 12 mm spanner, loosen the lock nut whil…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos