Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Rear bumper

In this short guide, we will see the process of disassembling and replacing the rear bumper of the BMW X3, in simple steps. First, move to the rear of the car and open the rear tailgate of the trunk; then unscrew the fixing screws found at the bottom and on both sides of the rear wheel arches, as shown in the video. At this point, gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; reassemble and properly fix the rear bumper, following the reverse process!

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Rear Bumper
Instructions for Replacing the Rear Bumper
BMW X3 (2003-2010 / MK 1, E83) Removing the rear bumper is fairly simple to do, and if you can lift the vehicle on a lift and remove the rear wheels, it becomes even easier. First,…
Replacement of the front headlight of the BMW X3
Replacement of the front headlight of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) In this short guide, we will see the steps that will allow us to disassemble and replace the front headlight of the BMW X3. First, we open the hood o…
How to Install the Trailer Hitch on the BMW X3
How to Install the Trailer Hitch on the BMW X3
BMW X3 (2017-2024 / MK 3, G01) This video shows how to install the trailer hitch on the BMW X3. This procedure is very simple and quick to perform. To install the trailer hitch on …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos