Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the BMW X5

Model: BMW X5 G05, G18 - Years 2019-2026
Part: Cabin air filter

In order to independently replace the cabin air filter in your BMW X5, you must follow all the steps described in this new guide dedicated to you. First of all, make sure that your BMW X5 is turned off, then move to the passenger side and proceed with removing the plastic panel located in the lower area of the glove box. Then use a 20mm Torx key to unscrew the screws of the air filter box cover. Once this is done, remove the cover in question and replace the air filter.

Posted on 29 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a BMW X5 E70
How to Replace the Cabin Air Filter on a BMW X5 E70
BMW X5 (2007-2013 / E70) The cabin air filter in your 2007-2013 BMW X5 E70 should be replaced periodically to maintain the air quality while using the air conditioning. Below…
How to Replace the Cabin Air Filter in a 2021 BMW X5
How to Replace the Cabin Air Filter in a 2021 BMW X5
BMW X5 (2019-2026 / G05, G18) If you want to replace the cabin air filter in your 2021 BMW X5, carefully follow the instructions below and then put them into practice. First, turn…
How to Replace the Cabin Air Filter for the Air Conditioning
How to Replace the Cabin Air Filter for the Air Conditioning
BMW X5 (1999-2006 / E53) First, locate the position of the cabin air filter. It is located in the engine compartment, positioned in a plastic housing immediately under the wi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos