Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Door Panel on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel (front right) on a BMW 3 Series: use a screwdriver to unscrew the screws located in the door opening handle and the screws present in the panel (after removing the plastic trim). Unscrew the remaining screws on the door panel and detach the retaining clips.

Finally, remove the door panel by hand and disconnect it (unplug the power wiring and the door opening cable). Perform the desired maintenance inside the door; reassemble all parts after maintenance (work in reverse order).


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Handle of a BMW 3 Series
How to Remove the Handle of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How do you replace the right outer handle (passenger side) on a BMW 3 Series? In this video, you will briefly see how to disassemble it and remove it…
How to Remove the Exterior Handle of a BMW 3 Series
How to Remove the Exterior Handle of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Learn how to remove and install the exterior handle located on the door of a BMW 3 Series. Remove the screws on the side of the door (side panel) usi…
How to disassemble the front door airbag of the BMW 3 Series
How to disassemble the front door airbag of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) These short and simple steps will allow us to disassemble and replace the airbag of the front door of the BMW 3 Series. First, we open the front door…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos