Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handle of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Handle

How do you replace the right outer handle (passenger side) on a BMW 3 Series? In this video, you will briefly see how to disassemble it and remove it from the door housing. To remove the lock, you need an Allen wrench. First, loosen the pin located inside the door (as shown in the video). Next, remove the left cover of the handle, then slide the handle to the left of the door. Remove the door opening handle and insert the new piece into the door. Finally, attach the handle and tighten it with the appropriate screwdriver.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, learn how to replace the adhesive cover of the interior handle on a BMW 3 Series yourself. To perform this simple task, get inside the vehicle…
How to replace the interior door handle of the BMW Series 3.
How to replace the interior door handle of the BMW Series 3.
BMW Serie 3 (2012-2019 / F30, F31) Today we will explain how to independently replace the interior door handle of a BMW Series 3. To carry out the replacement of the handle, we need to…
How to Remove the Exterior Door Handle of a BMW 3 Series
How to Remove the Exterior Door Handle of a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Before you begin, open the front door of your BMW 3 Series. Start by prying off and removing the side cover that protects the screw securing the exte…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos