Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Headlight Height on a BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Checks and maintenance

Below are the main instructions for adjusting the height of the headlights on a BMW 3 Series. First, position yourself in front of a fixed reference in low light to make the adjustment easier. Then, open the hood of the vehicle and locate the adjustment screw for the headlight assembly using a suitable wrench. At this point, adjust the height by turning the headlight adjustment screw; ensure that both beams are perfectly aligned.

Posted on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Headlight Height on a BMW 3 Series
How to Adjust the Headlight Height on a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) This guide provides instructions for adjusting the headlight height on a BMW 3 Series. First, position yourself in front of a fixed reference point, …
How to Adjust the Headlights on a BMW 3 Series
How to Adjust the Headlights on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In this brief guide, follow the steps to adjust the height of the headlight beam on a BMW 3 Series. First, position yourself in front of a clear refe…
How to adjust the headlights of the BMW 3 Series
How to adjust the headlights of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today we will explain how to adjust the headlights of the BMW 3 Series model F30 F32. To perform this operation, we must first turn on the vehicle li…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos