Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Instrument Cluster LEDs on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Instrument panel light

See other generations:
Video tutorial

To give the instrument cluster a sportier and more appealing look, you can replace the backlighting LEDs with white ones, known as cool light. To perform this operation, first remove the instrument cluster from the dashboard by taking out the mounting screws located along the top edge of the frame.

Once the instrument cluster is removed, open it to access the circuit board, and be careful not to scratch the dial cover while removing the needles. Once you reach the circuit board, desolder and remove the original LEDs to replace them with the white ones.

It is recommended to connect the cluster temporarily before reassembling it to ensure everything works and all LEDs light up. Then proceed in reverse order to reassemble the cluster.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Reset BMW 3 Series E46 Instrument Cluster
Reset BMW 3 Series E46 Instrument Cluster
BMW Serie 3 (1998-2006 / E46) In this video, you will quickly learn how to reset and calibrate the instrument cluster of a BMW 3 Series E46, a procedure that also applies to other…
How to Install LED Bulbs in a BMW 3 Series F30-F31
How to Install LED Bulbs in a BMW 3 Series F30-F31
BMW Serie 3 (2012-2019 / F31, F30) In this video tutorial, you can see how to install LED bulbs in a BMW 3 Series F30-F31 by following some simple steps: First, purchase LED bulbs from…
How to Reset the Service Light on a BMW 3 Series E46?
How to Reset the Service Light on a BMW 3 Series E46?
BMW Serie 3 (1998-2006 / E46) To reset the Service light on the instrument cluster of the BMW 3 Series E46, turn on the ignition and press and hold the button located to the left …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos