Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the BMW 5 Series Alarm?

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

To disable the alarm on the BMW 5 Series, the car must be locked, and you will need to use the specific remote: once outside the vehicle, press the button located at the bottom of the remote, which opens the trunk. By holding it down for a few seconds, you will notice that the car's alarm will be completely disabled: you can verify this by manually opening the car. To reactivate the device, simply press and hold the same button again until it is restored.


Posted on 14 August 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2003-2010 / E60, E61) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
BMW Serie 5 (1995-2003 / E39) Before you start, open the trunk lid of your BMW 5 Series. Begin by releasing the clips that secure the hydraulic lift supports, using a flathead scr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos