Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Turn Signal on BMW F30

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

To start this operation, first tilt the glass of the side mirror upward. Using a plastic trim tool, gently pry off the supports, being careful not to break them.

Now remove the cover, which is held in place by three clips, using pliers without applying excessive pressure. Next, unscrew the mounting screws that secure the turn signal, which can now be removed after disconnecting the wiring connector.

Finally, replace it and follow the steps in reverse for reassembly.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Turn Signal Bulb in the BMW 3 Series Mirror
How to Replace the Turn Signal Bulb in the BMW 3 Series Mirror
BMW Serie 3 (2012-2019 / F31, F30) Discover in this video tutorial how to remove and replace the bulb or lens of the turn signal in the external rearview mirror of the BMW 3 Series. Fi…
How to Replace the Turn Signal Bulb of the BMW 3 Series Side Mirror
How to Replace the Turn Signal Bulb of the BMW 3 Series Side Mirror
BMW Serie 3 (2012-2019 / F31, F30) Today, you will see the instructions to remove and replace the turn signal light of the outer mirror of the BMW 3 Series. First, move to the side and…
How to Remove the Mirror from a BMW 3 Series Side Mirror
How to Remove the Mirror from a BMW 3 Series Side Mirror
BMW Serie 3 (2012-2019 / F31, F30) Here’s how to remove the mirror from the external side mirror on a BMW 3 Series. Use a plastic or rubber-coated lever: pry between the edge of the mi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos