Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fan on BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Blower motor

See other generations:
Video tutorial

Is the air fan on your BMW 3 Series damaged? Here's how to replace it. Lift the hood, remove the engine cover panel, and pry off the plastic trim under the windshield with a lever. Use a screwdriver to unscrew the fan cover (where the air fan is located).

Remove the plastic cover of the fan with a screwdriver. Unscrew the mounting screws of the fan. Insert the new air fan and connect the power supply.

Install the fan cover and the engine soundproofing panel. Check that all previously removed parts are correctly installed.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Remove and Repair the Cabin Fan of a BMW 3 Series
How to Remove and Repair the Cabin Fan of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) If the cabin fan struggles to start or makes a buzzing or squeaking noise when turned on, you can fix it by cleaning and lubricating the bushings whe…
How to Replace the Cabin Fan in a BMW 3 Series
How to Replace the Cabin Fan in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before starting, open the front door of your BMW 3 Series. Begin by removing the front windshield wipers by unscrewing the mounting bolts. Next, remo…
Removing the Radiator Fan from a BMW 3 Series
Removing the Radiator Fan from a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Replace the damaged radiator fan on a BMW 3 Series. Open the car door, pull up the hood release lever located at the bottom left of the dashboard, an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos