Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : BMW 3 Series cabin filter replacement

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Cabin air filter
Operation: BMW 3 Series cabin filter replacement

In this video we will see how to replace the cabin filter of the now historic BMW 3 Series E36. First of all, position yourself on the passenger side and equip yourself with a Phillips screwdriver: we open the glove compartment from the button and begin to unscrew the screws that are positioned around the frame of the compartment. Also remove the two screws inside the air vent and extract all the plastic part (vents included). Once you have removed all the screws, disconnect the interior light connector and remove it: you will finally have access to the air filter to replace it!


Posted on 6 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the cabin filter of the BMW E90? Read Answer
    • Serie 3 1990-2001 - How much does the BMW E46 cabin air filter cost? Read Answer
    • Serie 3 2005-2013 - Where is the cabin filter of the BMW 320 F30-F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos