Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on BMW 5 Series

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

Remove the door cover panel on a BMW 5 Series. Start by removing the screw covers on the panel.

Use a screwdriver to remove the screws located in the holes where you removed the covers. Remove all screws on the door panel and detach the retaining clips.

Pull the panel away from the door and disconnect the wiring harness and the opening cable. Perform the desired maintenance inside the door.

Then reconnect the electrical connectors and install the new door cover panel.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Door Panel of the BMW 5 Series
Removing the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today, let's go over the instructions to remove and replace the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and sta…
How to Remove the Rear Door Panel of the BMW 5 Series
How to Remove the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, let's go through the procedure for removing the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and start by rem…
Removing the Front Door Panel of the BMW 5 Series
Removing the Front Door Panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Follow these brief steps to remove and replace the front door panel of the BMW 5 Series. First, open the front door and start by removing the plastic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos