Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Grille on BMW 2 Series

Model: BMW Serie 2 F45 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Trim cover

See other generations:
Video tutorial

In this guide, you will learn how to remove the front grille of the BMW 3 Series. First, open the hood and remove the rubber seal along the edge of the hood.

Next, unscrew all the Torx screws located beneath the seal. Then, carefully pull the grille out from the inside of the vehicle, taking care not to break the supports.

Now, proceed with installing the new grille: insert it from the outside to fit it in place, then reassemble everything in reverse order!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper Grille of the BMW 2 Series
How to Remove the Front Bumper Grille of the BMW 2 Series
BMW Serie 2 (2014-2021 / F45) This short and simple guide shows you how to remove and replace the front bumper grille of the BMW 2 Series. First, open the hood of the vehicle and …
How to Replace the Battery in a BMW 2 Series?
How to Replace the Battery in a BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) To replace the battery in a BMW 2 Series, open the hood to access the components in the engine compartment. Just below the windshield, you will find …
How to replace the front bumper grilles of the BMW 2 Series
How to replace the front bumper grilles of the BMW 2 Series
BMW Serie 2 (2013-2021 / F22) The instructions provided in this guide will explain the procedure for disassembling and replacing the grilles of the front bumper of the BMW 2 Serie…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos