Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper grilles of the BMW 2 Series

Model: BMW Serie 2 F22 - Years 2013-2021
Part: Grille

The instructions provided in this guide will explain the procedure for disassembling and replacing the grilles of the front bumper of the BMW 2 Series. First, we open the hood of the car and begin to remove the clips located at the top of the bumper, which hold the grilles in place; we gently remove the two grilles from the bumper, as shown in the video. At this point, we replace and install the new original bumper grilles, securing them correctly with the top clips; all that's left is to close the hood, completing the replacement operation.

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper Grille of the BMW 2 Series
How to Remove the Front Bumper Grille of the BMW 2 Series
BMW Serie 2 (2014-2021 / F45) This short and simple guide shows you how to remove and replace the front bumper grille of the BMW 2 Series. First, open the hood of the vehicle and …
How to replace the front headlight bulb of the BMW 2 Series F22
How to replace the front headlight bulb of the BMW 2 Series F22
BMW Serie 2 (2013-2021 / F22) When one of the bulbs in the front headlight of your BMW 2 Series f22 stops working suddenly, it is not necessary to go to a local workshop to replac…
Removing Front Grille on BMW 2 Series
Removing Front Grille on BMW 2 Series
BMW Serie 2 (2014-2021 / F45) In this guide, you will learn how to remove the front grille of the BMW 3 Series. First, open the hood and remove the rubber seal along the edge of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos