Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Sunroof Initialization

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Onboard computer

It may happen, for example after disconnecting the battery, that the instrument cluster indicates the sunroof is open even when it is closed: in these cases, you need to perform the sunroof initialization. This is a manual procedure that you perform by holding down the central button of the sunroof control. Starting from the closed position, with the ignition on, hold the central button until the sunroof lifts to the semi-open position. Once this position is reached, continue to hold it so that the sunroof goes slightly beyond the semi-open position to complete the "normalization" procedure.
At this point, release the switch and press it again until the sunroof completes a full open and close cycle: now you can release the switch and the "initialization" is complete.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Close and Repair the Sunroof of the BMW 5 Series
How to Close and Repair the Sunroof of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will learn how to close and repair the sunroof of the BMW 5 Series by following the instructions below. First, get inside…
Tips and Tricks for the Sunroof
Tips and Tricks for the Sunroof
BMW Serie 5 (1995-2003 / E39) This video shows some tips on how to use the sunroof in your car. If you can't understand how to operate the sunroof using its control button, this v…
How to reset the panoramic sunroof of the BMW 5 Series
How to reset the panoramic sunroof of the BMW 5 Series
BMW Serie 5 (2017-2024 / G30) The instructions in this guide will show us how to reset the sunroof motor of the BMW 5 Series. First, we get into the car and start the dashboard; t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos