Do it yourself
| ||||
|
BMW Serie 5 - Video tutorial
Model: BMW Serie 5
E61, E60
- Years 2003-2010 Whenever the tire pressure is checked and brought back to the operating one, the pressure control (TPM: Tire Pressure Monitor) must be reset on the on-board computer to allow the sensors present in the valves to set to the current value and be able to subsequently signal the puncture. of the tire. The reset operation is carried out manually and no diagnostic instrumentation is required: it must be carried out with the engine running and the machine stopped. Access the information menu by simply pressing the knob on the central tunnel; turn it to the ADJUSTMENTS section, enter the section by pressing the knob and rotate it until the VEHICLE \ TIRES item is highlighted, press again to access the TIRE DRILLING: RPA item, turn the knob to select the CONFIRM PNEUM PRESSURE command and press to confirm on the command YES.
Posted on 8 July 2023 by ScegliAuto
Check the correct tire pressure of your car
BMW Serie 5 (1995-2003 / E39) When it comes to road safety, regarding the tires of your car, one of the necessary measures is to monitor the tire pressure. Proper tire pressure wi
How to reset the tire pressure warning light in the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In this tutorial we can see how to reset the tire pressure warning light in the BMW 5 Series, an extremely simple and quick operation, to be carried
How to reset the tire warning light in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial we can see how to reset the tire warning light in the BMW 5 Series, a very simple and fast operation. Before proceeding, we must obv Other guides that may interest you
|
Fiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |