Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remote Key Battery Replacement for BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Key

In today's video tutorial, you will learn how to remove and replace the battery in the remote key for a BMW X3. First, take your remote and extract the key. Then, pry to remove the rear cover, as shown in the video. At this point, you have access to the battery: remove it using something sharp and replace it with the new one; it is recommended to use a high-quality battery for better longevity. Once installed, reattach the cover and insert the key back!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the BMW X3 Remote Battery?
How to Replace the BMW X3 Remote Battery?
BMW X3 (2010-2017 / MK 2, F25) As shown in this tutorial, replacing the battery in the BMW X3 remote is a very simple and quick task. You will need a replacement CR2032 battery and…
How to Replace the BMW X3 Remote Battery?
How to Replace the BMW X3 Remote Battery?
BMW X3 (2010-2017 / MK 2, F25) Replacing the battery in the BMW X3 F25 remote is a very simple task. In this video tutorial, you can see how to proceed; you only need a replacement…
Replacing the Remote Battery on BMW 3 Series E46 - X3 E83
Replacing the Remote Battery on BMW 3 Series E46 - X3 E83
BMW X3 (2003-2010 / MK 1, E83) In this video tutorial, you will learn how to disassemble and replace the battery of the key remote on the BMW 3 Series E46, as well as on the X3 E83…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos