Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Brake Light on BMW 5 Series E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Warning light – error code

In this video tutorial, you will learn how to reset the brake light on a BMW 5 Series E60. First, get inside the vehicle and turn on the ignition. Then, using the button on the dashboard, press until the brake light appears. Next, navigate by pressing the button and follow the reset procedure as shown in the video. At this point, you will notice that the light turns off and any warnings on the dashboard computer will disappear (if you followed the procedure correctly). Finally, start the vehicle and check the result.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Fluid Warning Light on a BMW 5 Series
How to Reset the Brake Fluid Warning Light on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Let's see how to reset the brake fluid warning light on a BMW 5 Series E60: turn on the ignition and go to the "Vehicle Status" menu from the iDrive.…
How to Reset the TPMS Light on a BMW E60
How to Reset the TPMS Light on a BMW E60
BMW Serie 5 (2003-2010 / E61, E60) When the TPMS light comes on in a 2005 BMW 5 Series, model E60, it means you need to adjust the tire pressure. Once you have done that, you must rese…
How to reset the service light on the BMW 5 Series E60
How to reset the service light on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) It may happen that the yellow service light on your BMW 5 Series E60 stays on even after performing the regular service. In this case, the only solut…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos