Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the TPMS Light on a BMW E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Tire pressure warning light

When the TPMS light comes on in a 2005 BMW 5 Series, model E60, it means you need to adjust the tire pressure. Once you have done that, you must reset the light. To reset, first turn on the ignition, then press the directional buttons to select "AUTO" and then "AUTO SETTINGS". Select "TIRE PRESSURE RESET" and wait for the reset to load. When the reset operation is complete, turn off and then turn on the ignition again to update the system.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will learn how to reset the brake light on a BMW 5 Series E60. First, get inside the vehicle and turn on the ignition. Th…
BMW Serie 5 (2003-2010 / E61, E60) It may happen that the yellow service light on your BMW 5 Series E60 stays on even after performing the regular service. In this case, the only solut…
BMW Serie 5 (2003-2010 / E61, E60) In this new mini guide dedicated to your BMW 5 Series E60 (2003-2010), discover how to manually reset the service light that keeps turning on steadil…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos