Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Outer Handle of BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the outer door handle of a BMW 3 Series E90. First, open the door on the affected side and use a pry tool to remove the side plastic caps. Then, use a screwdriver to remove the screws found inside the holes.

Using a pry tool, detach the first piece of the handle, and then pull out the final part by disconnecting the electrical connector, as shown in the video. At this point, reassemble the handle, fixing any internal defects and installing the new handle followed by the smaller piece!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Handle of the BMW 3 Series
How to Remove the Front Door Handle of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In this brief and simple guide, you will see the steps to remove and replace the outer handle of the front door of the BMW 3 Series. First, open the …
How to Remove the Exterior Door Handle of a BMW 3 Series
How to Remove the Exterior Door Handle of a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Before you begin, open the front door of your BMW 3 Series. Start by prying off and removing the side cover that protects the screw securing the exte…
How to Remove the Handle of the BMW 3
How to Remove the Handle of the BMW 3
BMW Serie 3 (1998-2006 / E46) Remove the outer door handle of the BMW? Let's take off the handle from the 3 Series. Move the plastic cover at the top of the door, then unscrew the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos