Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bonnet Panel of BMW 1 Series

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Body

In this video tutorial, you will learn how to remove the rear bonnet panel of a third-generation BMW 1 Series. First, open the tailgate and remove the shelf hooks. Then, use a plastic lever to remove the trim at the top and unscrew the screws located on the edges with a T20 Torx key. Next, remove the additional trims and unscrew the tailgate closure screw and the panel screws with a T25 Torx key; then, lever the sides of the panel to extract it, disengaging it from the internal clips, as shown in the video.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Wiper Motor on a BMW 1 Series
Removing the Rear Wiper Motor on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) This guide shows how to replace the rear wiper motor on a BMW 1 Series. Unscrew the fastening nut of the wiper arm; remove it from the tailgate. Lift…
Replacement of the rear windshield wiper motor of the BMW 1 Series
Replacement of the rear windshield wiper motor of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's steps will show us how to disassemble and replace the rear windshield wiper motor of the BMW 1 Series. First, we open the rear trunk door and…
How do you open the rear hatch of the BMW 1 Series?
How do you open the rear hatch of the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) The opening of the rear tailgate of the BMW 1 Series, to be clear the luggage compartment, is very convenient, in fact being a loading compartment, i…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos