Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Alternator BMW 1 Series E87

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Alternator

In this video tutorial, you will learn how to remove the alternator from a BMW 1 Series E87 by following these main instructions. First, disconnect the battery, then open the bonnet of the car and loosen the tensioner of the serpentine belt to remove it; then simply unscrew the mounting bolts of the alternator to remove it, disconnecting the various wiring. At this point, replace it with the correct new one and reassemble everything, paying attention to the supports. Finally, install the serpentine belt!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator Belt on the BMW 1 Series (120i)
How to Replace the Alternator Belt on the BMW 1 Series (120i)
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this guide, we will see the instructions that will allow us to remove and replace the alternator belt on the BMW 1 Series (120i). First, open the …
Fuse Diagram for BMW 1 Series E87
Fuse Diagram for BMW 1 Series E87
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This video contains the fuse diagram for the BMW 1 Series E87 from the fuse box located inside the cabin. You should consult the owner's manual for y…
How to Replace the Auxiliary Belt on a BMW 1 Series?
How to Replace the Auxiliary Belt on a BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To replace the auxiliary belt on a BMW 1 Series, loosen the screws securing the air filter box, located at the top of the engine bay. Once the box is…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos