Do it yourself
Frequently asked questions about cars and motorcycles

Window Regulator Replacement on BMW 5 Series

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Side window

See other generations:
Video tutorial

Remove the cover near the door handle and unscrew the underlying screw. Using a plastic wedge or a small flat screwdriver, pry off the switch panel and disconnect its connector.

Detach the door panel, then disconnect the speaker connector and unscrew the screws that secure the central handle, removing it. Also remove the door handle and take off the entire door cover. Using the wedge, remove the window trim and unscrew all the screws of the window regulator: support, motor, and gear.

Reverse the procedure for installation.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) This guide briefly outlines the instructions for removing and replacing the window regulator mechanism on the BMW 5 Series. First, open the front doo…
BMW Serie 5 (2003-2010 / E60, E61) In this video tutorial, learn how to reset and recalibrate the window regulator system on a BMW 5 Series E60, 3 Series E90, and also on E87, E84, F10…
BMW Serie 5 (1995-2003 / E39) In this short and simple guide, you will learn how to remove and replace the window regulator mechanism of the BMW 5 Series. First, open the front or…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos