Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a BMW 4 Series

Model: BMW Serie 4 F32, F36, MK 1, F33 - Years 2013-2020
Part: Headlight bulb

In this video tutorial, you will learn how to remove and replace the front headlight bulb on a BMW 4 Series. Access the bulb through the fender: turn the front tire to expose the cover and remove it. Next, take off the plastic protective cap of the bulb and disconnect the electrical connector from the module: then remove the bulb along with the module itself and replace it with the new one, as shown in the video. Reconnect the connector and replace the plastic cover and the outer cover!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the bulb of a front headlight of a BMW 4 Series
How to replace the bulb of a front headlight of a BMW 4 Series
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) In this tutorial, we can see the procedure to follow to replace the bulb of a front headlight of a BMW 4 Series car. First of all, it is necessary to…
How to Replace the Fog Light Bulbs on the BMW 4 Series 428i XDrive F32
How to Replace the Fog Light Bulbs on the BMW 4 Series 428i XDrive F32
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) This guide shows how to replace the fog light bulbs on the BMW 4 Series 428i XDrive F32. Using an 8 mm wrench, remove the three bolts at the front of…
How to replace the air filter of the BMW Series 4 F32.
How to replace the air filter of the BMW Series 4 F32.
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) To correctly complete the replacement of the engine air filter in your BMW Series 4 F32, you need to follow the procedure outlined in the following g…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos