Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on BMW 3 Series F31

Model: BMW Serie 3 F30, F31 - Years 2012-2019

Here are the instructions to remove and replace, in simple steps, the horn or sound signal on a BMW 3 Series F31. First, lift the vehicle from the front right side and remove the wheel by unscrewing the bolts; then, unscrew the screws found on the wheel well to remove it, allowing access to the horn. At this point, proceed with the removal; disconnect its electrical connector and unscrew the mounting nut of the bracket to take it out completely. Finally, replace it with the new one, applying the reverse procedure of disassembly!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Horn on a BMW 3 Series
How to Replace the Horn on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will see how to remove and replace the horn on a BMW 3 Series, following the instructions below. First, remove the fro…
Replacing Front Headlight Bulb on BMW 3 Series F30 - F31
Replacing Front Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) In today's video, you will see how to remove and replace the front headlight bulb on a BMW 3 Series F30 and F31. First, open the hood and remove the …
How to replace the battery of the key for the BMW 3 Series F31
How to replace the battery of the key for the BMW 3 Series F31
BMW Serie 3 (2012-2019 / F30, F31) In order to replace the button battery inside the key of your BMW 3 Series F31 on your own, simply follow the steps described in our new guide. First…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos