Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Horn Fuse Located in the BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Checks and maintenance

If the horn in your BMW 3 Series suddenly stops working, first check the status of the respective fuse, the location of which is indicated in this video. It is located in the fuse box in the lower right area of the dashboard, just below the glove compartment. To access it, remove the indicated plastic panel by simply prying it off the pillar. Once done, unscrew the support screw, remove it, and proceed to replace the last fuse in the right column. Of course, use a replacement with the same amperage.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Horn Fuse on a 3 Series
Replacing the Horn Fuse on a 3 Series
BMW Serie 3 (1998-2006 / E46) Let's replace the horn fuse on a BMW 3 Series. Open the cover and access the vehicle's interior, then open the glove compartment door and remove the …
Where Are the Fuses on a BMW 3 Series?
Where Are the Fuses on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) On the BMW 3 Series, all fuses are located inside the designated fuse box installed in the vehicle. You can find it behind the glove compartment on t…
Where is the fuel pump fuse located in the BMW 3 Series?
Where is the fuel pump fuse located in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, you can see where the fuel pump fuse is located in the BMW 3 Series, an element to check if it suddenly stops working. As shown, the f…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos