Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel pump fuse located in the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuel pump

In this video, you can see where the fuel pump fuse is located in the BMW 3 Series, an element to check if it suddenly stops working. As shown, the fuse is positioned in the box located inside the cabin, just behind the glove compartment on the passenger side, and it is the third fuse in the first central column. Its amperage is 20A. If it is blown, make sure to replace it with a fuse of the same specifications and always work with the vehicle turned off; otherwise, you may damage the various connected devices.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuel pump relay located in the BMW 3 Series?
Where is the fuel pump relay located in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) If the fuel pump in your BMW 3 Series suddenly stops working, the first thing to do is check the status of the respective relay, whose position is sh…
Fuel Pump Replacement for BMW 3 Series
Fuel Pump Replacement for BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…
Guide to replacing the fuel pump of the BMW 3 Series 325i
Guide to replacing the fuel pump of the BMW 3 Series 325i
BMW Serie 3 (1998-2006 / E46) These brief and simple instructions will show us the main steps on how to disassemble and replace the fuel pump of the BMW 3 Series 325i. First, we o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos