Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headrest on BMW 5 Series E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010

In today's video, you will learn how to remove the front headrest on a BMW 5 Series E60 by following these simple steps. First, open the front door and start by removing the rear cover of the seat, prying it off from the sides. Next, unclip the metal hook and disconnect the two rods of the headrest, as shown in the video. At this point, you can lift the headrest and remove it. Then, reinstall it by inserting it into the guide and securing it properly onto the support bracket. Finally, reattach the rear cover of the seat!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
Where to Find the Fuse Box of the BMW 5 Series E60
Where to Find the Fuse Box of the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …
Removing the Fuel Pump on the BMW 5 Series E60
Removing the Fuel Pump on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Today, you will learn how to remove and replace the fuel pump or fuel sender on the BMW 5 Series E60 in simple steps. First, access the rear of the v…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos