Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ceiling Panel on BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Checks and maintenance

How do you remove the panel from the BMW 3? Let's go through the disassembly of all the necessary parts for removing the roof panel. Remove the fastening screws for the side handles attached to the sides of the roof, then remove the sun visors and the overhead lighting assembly. Once all the cover plastics and overhead lights are removed, detach the cover panel around the perimeter of the car's roof. Once the panel is free from clips, you can pull it out from the vehicle. Replace the cover panel with a new one or reinstall the same one after repairing it.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Sunroof Panel of a BMW 3 Series
How to Remove the Sunroof Panel of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the sunroof panel of a BMW 3 Series? Let's see how to proceed in this video. Start by removing the side handles of the panel with a…
How to Remove the Soundproofing Panel of a BMW 3 Series Roof
How to Remove the Soundproofing Panel of a BMW 3 Series Roof
BMW Serie 3 (1998-2006 / E46) How do you remove the soundproofing panel of a BMW 3 Series roof? Let's see in this video how to proceed. Start by removing the side handles of the h…
How to Remove the Sunroof of a BMW 3 Series
How to Remove the Sunroof of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to remove the sunroof of a BMW 3 Series. Start by removing the side handles of the headliner with a screwdriver. Next, remove the sun v…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos